CLEANING
Soap and water, mineral spirits or vinyl cleaner will effectively clean all Polyform products. Do not use stronger chemicals, such as acetone, MEK, or lacquer thinner containing ketones. These products will cause irreversible breakdown of the chemical composition of the product and will void the warranty. Regularly scheduled maintenance with approved cleaning products will prolong the life of the product and keep it looking new.

#42, #43 MARKING INKS
Polyform provides custom marking inks which are specially formulated to permanently fuse to the product. These inks are designed to withstand ultraviolet rays and saltwater. Use of a product other than Polyform's may void the warranty.

#50, #52 SMALL GALVANIZED SHACKLE

#51, #53 STAINLESS STEEL SHACKLE
A handy addition to our products when you desire improved performance for tough mooring conditions. Specially designed bushing distributes load evenly to the ropehold. Each shackle is available with either a 1-1/4" (#50 & #51) or 1" (#52 & #53) bushing, for use with a variety of Polyform buoys and fenders - see reference chart below.

#20 PATCH KIT
Polyform supplies a patching kit for repairing small punctures in buoys and fenders. This patching kit is very successful when used for these types of repairs. Large cuts, or repairs to buoys and fenders used in extremely severe applications may not patch successfully. If there is a question or concern regarding repairs, contact your local Polyform representative or call the factory directly.

#30 POLYFORM HAND PUMP
Specifically designed for inflating Polyform products.

#70 FENDER ADJUSTER
Made from UV resistant vinyl with stainless steel hardware, Polyform's fender adjuster is easy to use. Adjust fender height instantly, with no knots. Accepts fender lines up to 5/8 inch in diameter. (white only)

#75 LINE HOLDER
This versatile line holder keeps line and cords neat and easily accessible. Made from UV resistant vinyl with stainless steel hardware for durability. (white only)